![]() ![]() You should see "Metal Gear Online" in the menu. If you are prompted for the MGS4 2.00 update, decline it. Install the MGO data from disc and install our patch: ![]() If it does not have MGO data, you will need to get a disc that does, or follow the MGO2 Launcher guide with a hacked PS3.If you get an error about the firmware, you did not install the correct HFW firmware and need to install it again.This will make sure that your disc actually has MGO data. When the application is ready, press Check Disc.Do not press Triangle and use the browser menu, or you will do an Internet Search, and it will not work! In the XMB, go to the Network column, and select Internet Browser.Put your MGO-compatible disc into the PS3.It will not say "HFW" or anything like that.Ĭheck your disc to make sure you have MGO data: Make sure the firmware version matches what you installed. Once the update is done, go to the Settings column, and select System Information.If you can't install the firmware this way, then go into Recovery Mode on your PS3, and install it there.Older / cheaper ones work best for the PS3. If that's not it either, you might need to use a different flashdrive.If that's not it, you may not be on FAT32.If no firmware is detected, then you may have named the file incorrectly or did not extract it.You should see HFW in the name of this firmware. In the XMB, go to the Settings column, and select System Update.Install the HFW firmware from your flashdrive: Remove your flashdrive from your computer and plug it in to your PS3.Copy the HFW firmware that you just downloaded to the UPDATE folder.Inside that folder, create a new folder named UPDATE. Download the latest HFW firmware from the Downloads section.On the right side in the section labeled Show / hide, make sure File name extensions is checked. In Windows Explorer, click on View near the top-left of the window. Make sure file extensions are shown (not hidden) in your file viewer.You can follow a guide here:ĭownload the HFW, extract it, and put it on your flashdrive: You will lose all data on your flash drive once you do this! Be sure to copy anything you need off of it. ![]() If your flashdrive isn't formatted as FAT32, then it will need to be formatted. You can do this by right-clicking on it, and clicking on Properties. ![]() This guide uses Windows 10, but any operating system should work.Ĭheck to make sure that your flashdrive is formatted as FAT32.
0 Comments
Leave a Reply. |